The Bohr-Profi laser consists of a special cast housing in which two red diode laser modules are housed. The beams were expanded to lines and the lasers were arranged in a special drilling axis-centric position. The intersecting, very fine laser lines always mark the exact position of the drill tip on the material after adjustment to the respective drilling machine. It does not matter which thickness the material to be machined has or the height of the drill tip above the workpiece. The diode lasers are powered by a 1.5 V mignon battery and can be put into operation by means of a side-mounted on/off switch. The drilling professional is only attached around the sleeve. This means that any pillar drilling machine can be easily and quickly equipped or retrofitted. We offer two different housing types (L-Set 1 or L-Set 2) depending on the drill model and the corresponding sleeve thickness.

Please indicate the sleeve diameter in millimetres when ordering!

Your benefits at a glance:

⌧ Projection of a very fine laser cross exact
at the borehole position
⌧ Special drilling axis-centric arrangement of the
Laser modules - patented!
⌧ Simple and quick installation around the sleeve
⌧ Power supply via 1.5 V mignon battery
⌧ Two different housing models
- easy retrofitting for all standing drills
⌧ The laser cross is independent of the thickness of the material.