Set with 4 taper countersinks:
Taper countersink and deburring countersink with cross hole. Peeling cut. The chip flow through the cross hole prevents the chips from jamming with the workpiece. Ideal for burr-free and vibration-free countersinking and deburring of acrylic glass. Best results at low cutting speed.


Set with 7 flax core:
Flax core with through hole. Ideal for countersinking cylinder head bolts, hexagon bolts and nuts. Ideal for burr-free and vibration-free lowering in acyl glass. Best results at low cutting speed.


Serrox Drill cooling paste:
Drill cooling paste 250 ml for cooling material and countersink. Prevents stress formation in the material due to heating during the lowering process.

Brush for drill cooling paste: Ideal for applying the Serrox drill cooling paste to the countersinks.

Your benefits at a glance:

Countersink:
⌧ Countersink with cross hole for burr-free and vibration-free chip flow.
⌧ Total countersink range from 2 to 20 mm thanks to four matching countersinks.
Countersink :
⌧ Countersink 180° with through hole.
⌧ Large countersink range from M3 to M12(!) thanks to six matched countersinks.
⌧ Burr-free and vibration-free lowering and deburring of acyl glass.
Drill cooling paste with brush:
⌧ Voltage-free working in the material due to drill cooling paste
⌧ Clean dissipation of frictional heat through drilling coolant paste
⌧ Clean application of the drilling coolant paste to the countersink with the aid of a fine bristled brush.