logo
Acrylic glass Manufacturing >> Laser Optics

Art. Nr. 12030021 


Laser Optics for exact Positioning of Drilling Tools

Our professional drilling laser consists of a special
cast housing with two red diode laser modules. The
laser beams are widened to lines that are arranged
specially in a position centered to the drilling axle.
Once adjusted for a certain drilling machine the laser
cross always exactly indicates the position where the
tip of the borer will meet the working piece independantly
of whatever the thickness of the piece or the height
of the drill tip above the working piece is.
The lasers are energized by a 1,5 V AAA-battery and
are switched with a on/off switch on the side of the
housing. The drilling laser is mounted on the spindle
sleeve and fits to any common model of drilling
machine. According to the diameter of spindle sleeves
we offer two different models.
Please indicate the diameter of your spindle sleeve in
millimeters when ordering the drilling laser.

Your advantages at a glance:

⌧ projection of a very fine cross of laser beams exactly at the position of the hole
⌧ patented axle centered arrangement of laser modules
⌧ simple and rapid mounting at the spindle sleeve
⌧ energized by 1,5 V AAA-battery
⌧ two different housings for matching the needs of all common drilling machines
⌧ cross of laser beams independent of thickness of material

Technische Daten

Laser Modell L-Set 1 L-Set 2

Projektion . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . sehr feines, bohrachsen-zentrisches Kreuz
Ausgangsleistung . . . . . . . . . . . . . . . . . . . . . . . .
. 1 x 1 mW
Wellenlänge . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 635 nm
Erwartete Lebensdauer der Laserdiode bei 23° C . . .
. 40.000 h
Laserklasse . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 2
Versorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,5 V Mignon-Batterie
Arbeitstemperatur . . . . . . . . . . . . . . . . . . . . . . . .   0° C bis +40° C
Gehäuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Alugussgehäuse, beschichtet
Abmessungen (LxBxH) . . . . . . . . . . . . . . . . . . . . . 160 x 160 x 50 mm 220 x 220 x 50 mm
Gewicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .800 g 1500 g
Pinolendurchmesser . . . . . . . . . . . . . . . . . . . . . . . < = 60 mm 80 - 90 mm

 

Impressum: Serrox Technischer Handel Roland Saettler, Reinheimer Strasse 41, D-64372 Ober-Ramstadt.
VAT-ID DE214747801. Tel.: +49 6154 575-001 Fax: +49 6154 575-002 E-Mail: info@serrox.com.