logo
Acrylic glass Manufacturing >> Complete set "Countersinks"

Artikel Set Schraubensenken.jpg

Art. Nr. 30010040

Now available as a set, consisting of:

- 4 Cross-hole Countersink cutters
  2-5, 5-10, 10-15 und 15-20 mm
- 7 Flat Countersinks  M3, M4, M5, M6, M8, M10 und M12
- Serrox "Cool Drill" cooling paste

- Brush for application of the paste onto Countersinks

 

Complete set "Countersinks"

Set of 4 Cross-Hole countersink cutters: Cutter with cross-hole for countersink and/or deburring. Peeling Cut. The expellation of the splinter through the cross-hole prevents blocking between splinter and workpiece. Perfect for burr-free and vibration-free cutting of countersink holes and deburring Acrylic glass. Best results with low cutting speed.
Set of 7 flat Countersink cutters: Flat countersinks with throughhole. Perfect for cutting countersinks for cylinder-head screws, hex-head screws and hex-nuts. Best results with low cutting speed.
Serrox "Cool Drill" Cooling paste: Cooling paste 250 ml for cooling down workpiece and cutter. Prevents tensions in the workpiece in drilling process.

Application brush: Made for application of Serrox Cooling paste onto Cutters.

Your advantages at a glance:
Cutter with cross-hole for burr-free and vibration-free working.
Complete lowering range from 2 to 20 mm through
4 co-ordinated Countersink cutters
Flat countersinks 180° with throughhole
Great lowering range from M3 to M12 (!) through 7 co-ordinated flat countersink cutters
burr-free and vibration-free cutting of countersink holes and deburring of Plexiglas®.
Tension free cutting through cooling paste
Heat transport through cooling paste
Clean application of cooling paste onto cutters with fine-bristled brush


 

Impressum: Serrox Technischer Handel Roland Saettler, Reinheimer Strasse 41, D-64372 Ober-Ramstadt.
VAT-ID DE214747801. Tel.: +49 6154 575-001 Fax: +49 6154 575-002 E-Mail: info@serrox.com.